Dillon Standard Kit
mixing chamber · 0.5 bar · cast iron · thin aluminium
- Free shipping within Sweden & the EU
- 30-day returns
- Pay by card or Klarna
- Dillon torch with mixing chamber
- 4 welding tips (0, 1, 2, 3) + 1 copper cutting tip
- Cutting parts + cutting carriage – cuts up to 25 mm steel
- Check valves & cleaner
- Hose connection & manual
For you who hobby, restore cars or do general craft work — and want TIG-like precision without electricity.
- Hobby, car restoration, general craft
- Solid brass
- 4 welding tips (0–3) + 1 copper cutting tip
- Cuts up to 25 mm steel – cutting carriage included
Unsure? Most hobby users are fine with Standard. Pro accessories can be bought separately later.
You also need acetylene + oxygen, regulators (0–1 bar), hose and flashback arrestors. See the getting started guide.
0.5 bar · concentrated flame
See how oxygen and acetylene mix into a laminar flow – soft precision without turbulence.
Pick a material – see the result
Four jobs filmed in the workshop. Click the image to play the film.
Weld 1 mm aluminium without burning through
The mixing chamber and 0.5 bar give a soft, extremely concentrated flame. Full control, minimal heat spread.
- Material thickness
- 1.0 mm
- Working pressure
- 0.5 bar
- Filler
- Aluminium wire + flux
Repair cracked castings – structurally
Cast iron cracks easily as the weld cools. The soft flame gives full control of the puddle and a homogeneous result that matches the original material.
- Method
- Fusion welding
- Section thickness
- 8–10 mm
- Filler
- Cast-iron rod + flux
Cut 25 mm steel with the same torch
No separate plasma cutter, no bulky cutting torch. Straight, clean cuts in sheet and beam with the cutting attachment included in the kit.
- Cutting capacity
- 25 mm steel
- Accessories
- Cutting attachment + cutting carriage (included)
- Cut quality
- Straight, clean
Braze steel with copper cable – with no flux at all
The clean, concentrated flame lays a protective atmosphere over the puddle. The copper flows out and forms a tight joint – an experiment that shows how well the flame stops oxidation.
- Material
- 1 mm steel
- Filler
- Stripped copper cable
- Flux
- None
Full control, minimal heat spread
The mixing chamber and 0.5 bar give a soft, concentrated flame.
Why Dillon
- 0.5 bar soft, concentrated flame – the sheet warps less than with a turbulent high-pressure flame.
- Soft joint a seam you can hammer, file and plane. Bodywork’s party trick.
- One tool, four jobs weld, hard-braze, heat and cut with the same torch.
- No electricity the cylinders are enough for a workshop, and gas consumption is often lower than with conventional torches.
Included in the kit
- Dillon torch handle in solid brass
- 4 welding tips (sizes 0, 1, 2, 3) for common thicknesses
- Cutting top, bottom, copper cutting tip and cutting carriage – cut up to 25 mm steel
- Flashback arrestors, check valves and tip cleaners
- Hose connectors and Swedish manual
Good to have
- Wire & flux pack – everything you need for aluminium and cast iron
- Welding tips in more sizes for exact heat
- Protective gear – welding goggles and gloves
- Spare parts for every part of the torch
- Want more later? The Pro upgrade pack turns your Standard Kit into a Pro Kit.
Built to be inherited.
0.5 bar · soft joint · four jobs – one kit that covers it.
Pick the right kit
Same torch and the same 0.5 bar technology – the difference is the accessories. Unsure? Most hobby users are fine with Standard, and Pro accessories can be bought separately later.
| Property | Standard | Pro |
|---|---|---|
| Welding tips | 4 pcs (0, 1, 2, 3) | 8 pcs (00, 0, 0.5, 1, 1.5, 2, 2.5, 3) |
| Cutting attachments, cutting tip + carriage | Yes | Yes |
| Acetylene/air (tin) | – | Yes |
| Extensions | – | Straight + bent |
| Best for | Hobby, cars, general | Bodywork, pros, tight spots |
Frequently asked questions
What you need beyond the kit
If you already have oxy-acetylene gear, your cylinders, regulators and hoses fit directly.
- Oxygen and acetylene – standard cylinders, small ones are enough.
- Regulators for both gases, 0–1 bar.
- Low-pressure twin hose – existing equipment usually fits.
- Welding goggles DIN 5 and gloves.
Can I use existing cylinders and regulators?
Yes. If you already have oxy-acetylene gear, your cylinders, regulators and hoses fit directly – standard hose works. Both gases run at 0.5 bar.
Can I run propane or LPG?
Yes — with our Propane kit. The Standard and Pro kits are for acetylene; for propane/LPG you need the Propane kit.
Which materials can I weld and cut?
Steel, stainless, aluminium, cast iron, cast aluminium, brass and copper. Weld up to 8–10 mm, cut up to 25 mm steel.
Do I need flux?
Aluminium and cast iron: yes. Steel: no. Flux and wire are in the Wire & flux pack.
Why 0.5 bar and not higher pressure?
Low velocity gives a soft, concentrated flame without turbulence. The heat goes where you aim it, and the result is soft, workable seams – even in 0.8 mm sheet.
When should I not buy a Dillon?
If you lay long seams in heavy structural steel on a production line, MIG is faster. Dillon is for the jobs in between.
How long is delivery?
We ship within 1–2 business days and deliver within Europe. Delivery time is shown at checkout. Free shipping over 2,200 SEK in Sweden / €200 within the EU.
Specifications
For you who hobby, restore cars or do general craft work — and want TIG-like precision without electricity.
- Hobby, car restoration, general craft
- Solid brass
- 4 welding tips (0–3) + 1 copper cutting tip
- Cuts up to 25 mm steel – cutting carriage included
Unsure? Most hobby users are fine with Standard. Pro accessories can be bought separately later.
You also need acetylene + oxygen, regulators (0–1 bar), hose and flashback arrestors. See the getting started guide.
Shipping & returns
Free shipping in Sweden over 2,200 SEK and within the EU over €200. We ship within 1–2 business days and deliver to 27 EU countries.
You have 30 days open purchase. Contact us before you return an item.